Spark Super Patcher 2.0

[Cliocat]

I've struggled to install, or so I thought Superpatcher 2.0 on Spark.
Everything goes great until finally checking version which typically reports 900 on DJI Go 4 after completion.
I tried assistant 2 on PC and it reported 000000.
I then go to use and the DJI Go 4 reports standard 900 instead of 000000 or NA.
However Spark picks up 20 GPS instead of 11 to 13 normally. Also just tried hand catching and inverting doesn't kill props now.
Why does it say 900 still but act patched?

 

[jos A]

You will be prompted to verify the firmware version with the DJI Go 4 app. If Super-Patcher was successful DJI Go 4 will show the firmware version as 00.00.0000. This is normal and a good thing.
and it is 2.02 now.

GitHub - brett8883/DJI_Super-Patcher: Liberate DJI drones. Height limit, NFZ limit, enable Galileo Satellites + more

Liberate DJI drones. Height limit, NFZ limit, enable Galileo Satellites + more - GitHub - brett8883/DJI_Super-Patcher: Liberate DJI drones. Height limit, NFZ limit, enable Galileo Satellites + more

github.com

 

[BossBob]

Also, the invert to kill props function is turned off by superpatcher.

 

[Lgpproducciones]

I would love a super patcher working with Mavic Air 2s ...

 

[Lgpproducciones]

I would love a super patcher working with Mavic Air 2s ...