- Joined
- Feb 10, 2017
- Messages
- 71
- Reactions
- 40
- Age
- 56
The Air 2S controller right-stick that moves the aircraft left or right in MODE 2 (default) is glitchy. Got the Air 2S on 23 April. Updated to the latest firmware and charged my fly-more combo batteries and controller to full. Wasted one full battery setting up the controller and camera and calibrating the gimbal and compass.
I took it out for a flight and found a very unexpected characteristic. As I was flying, I decided to perform my typical manual point of interest pan, as I flew by an interesting building. The result was no ability to control the aircraft left or right from the right controller stick. Thus, you don't get to both yaw and pan motion at the same time.
I stopped the aircraft and simply gave left and right input from the right stick...NOTHING happened. Very odd. I continued nonetheless to get a few photos and a bit more video. All the while I only used the yaw function to turn the drone...very annoying. As I came back, I decided to put the drone in cinematic mode. I was able to move left and right again. I put it back to normal/precision mode and the sticks remained in working condition. Upon landing, and observing all settings, I could find no reason for the controller behaving like this.
Lastly, I am uncertain of this being a glitch but my controller defaulted to the non-follow mode for the gimbal. I did not figure this out until I flew it, lol. Just bringing this up because I am "almost" certain that I did not choose to adjust this as I was setting it up. Anyone else getting odd results or settings defaulting unexpectedly?
I took it out for a flight and found a very unexpected characteristic. As I was flying, I decided to perform my typical manual point of interest pan, as I flew by an interesting building. The result was no ability to control the aircraft left or right from the right controller stick. Thus, you don't get to both yaw and pan motion at the same time.
I stopped the aircraft and simply gave left and right input from the right stick...NOTHING happened. Very odd. I continued nonetheless to get a few photos and a bit more video. All the while I only used the yaw function to turn the drone...very annoying. As I came back, I decided to put the drone in cinematic mode. I was able to move left and right again. I put it back to normal/precision mode and the sticks remained in working condition. Upon landing, and observing all settings, I could find no reason for the controller behaving like this.
Lastly, I am uncertain of this being a glitch but my controller defaulted to the non-follow mode for the gimbal. I did not figure this out until I flew it, lol. Just bringing this up because I am "almost" certain that I did not choose to adjust this as I was setting it up. Anyone else getting odd results or settings defaulting unexpectedly?