Vision system error

[ceo_acm]

Hi guys anyone now how to fix this issue I have for vision system error saying downard right vision sensor error (2)

 

[Thomas B]

If a restart of everything doesn’t fix it I’d try a reflash. Failing that follow the onscreen instructions in your pic.

 

[DanMan32]

You can try OA recalibration using Assistant 2 with a PC. The calibration process shows what the camera being calibrated is seeing.

 

[ceo_acm]

If a restart of everything doesn’t fix it I’d try a reflash. Failing that follow the onscreen instructions in your pic.

Thanks mate will try [emoji1360]

 

[ceo_acm]

You can try OA recalibration using Assistant 2 with a PC. The calibration process shows what the camera being calibrated is seeing.

Hi jus tried this but completed the calibration and then a error came up saying unable to detect calibration image so goin try diffrent laptop as I did it on my Mac

 

[DanMan32]

But during the calibration phase for the bottom sensors, did an image from the camera appear?
Granted the image shown could be from the working camera, but if it doesn't appear, then there's a good chance it's a hardware issue.

 

[ceo_acm]

But during the calibration phase for the bottom sensors, did an image from the camera appear?
Granted the image shown could be from the working camera, but if it doesn't appear, then there's a good chance it's a hardware issue.

Thanks Dan all sorted still got the error coming up after I finished calibration but then I decided just to connect controller and dgi go 4 and boom the warning gone thanks for your help much appreciated

 

[Patrick T.]

Thanks Dan all sorted still got the error coming up after I finished calibration but then I decided just to connect controller and dgi go 4 and boom the warning gone thanks for your help much appreciated

Had the same error on my mavic 2 zoom
Dji assistant vision sensors calibration fixed it now works fine

 

[ceo_acm]

Had the same error on my mavic 2 zoom
Dji assistant vision sensors calibration fixed it now works fine

The error just come back on again might try calibration again

 

[apeel]

This is probably a long shot, but is there any dirt on that sensor?

 

[Patrick T.]

The error just come back on again might try calibration again

When you calibrate the sensors you have to calibrate all the sensors top,bottom.sides,front.back and make sure you go through the whole process and it say complete

 

[ceo_acm]

When you calibrate the sensors you have to calibrate all the sensors top,bottom.sides,front.back and make sure you go through the whole process and it say complete

I did it last nite came up saying complete tried it and no visible errors turned it on this morning and it back on again? Grrrrr lol

 

[Patrick T.]

I did it last nite came up saying complete tried it and no visible errors turned it on this morning and it back on again? Grrrrr lol

Maybe the actual bottom sensor has a bad connection or bad sensor

 

[ceo_acm]

This is probably a long shot, but is there any dirt on that sensor?

No dirt no mate