- Joined
- Jan 10, 2017
- Messages
- 448
- Reactions
- 331
- Age
- 53
My setup is a Mavic Pro with battery mod flighting with one stock battery and two external 4600mAh battery’s
I know that the Airdata flight records get it’s voltage reading from the stock battery. Where does the PhantomHelp fight log get there voltage readings. My flight record in Airdata below shows a large deviations in cells voltage. But in PhantomHelp is not showing any voltage changes from 12% to 1%. Are the voltage readings in PhantomHelp, the over all volt the MP is receiving from stock and external batteries?
Jun 30th, 2018 06:24AM | General | Drone Flight Log from DJI GO app, version 4.2.6 on iOS | Total Mileage: 112,334 ft | United States | Airdata UAV
DJI Flight Log Viewer - PhantomHelp.com
I know that the Airdata flight records get it’s voltage reading from the stock battery. Where does the PhantomHelp fight log get there voltage readings. My flight record in Airdata below shows a large deviations in cells voltage. But in PhantomHelp is not showing any voltage changes from 12% to 1%. Are the voltage readings in PhantomHelp, the over all volt the MP is receiving from stock and external batteries?
Jun 30th, 2018 06:24AM | General | Drone Flight Log from DJI GO app, version 4.2.6 on iOS | Total Mileage: 112,334 ft | United States | Airdata UAV
DJI Flight Log Viewer - PhantomHelp.com
