Front right arm repair

[offbeatninja]

Hey guys, so after a crash my front right arm is loose. Took off the cover to see what was wrong and the part highlighted below was not sitting flush, it is pushed up with significant pressure, and after several failed attempts to put it back the way it should be, I'm at a loss as to what I should do next.

Any help or tips would be immensely appreciated! Thanks!

 

[JeepDSL]

Is this a picture of your drone or some stock photo? I don't see anything wrong.

 

[offbeatninja]

It's a stock photo just to highlight the part I'm talking about. I can post a photo of mine when I get home.

 

[Cyberpower678]

@Thunderdrones might be able to help.

 

[Soro]

I'm having the same exact issue. After installing a new front right arm. No matter which way I turn that pivot cylinder it never aligns with the frame of the drone and the position the arm should be in. The front right arm is always stuck in the middle between fully retracted and fully expanded.

 

[Haloweenhamster]

Yeah they're fun to fit

You can't just slide it in you have to put tension on it

 

[Soro]

Yeah they're fun to fit

You can't just slide it in you have to put tension on it

That did it, thank you!!!