Hi everyone, anyone here ever got some weird battery error messages on RC?
Before writing this post, I dig into other "battery errors" on the forum but couldn't find yet something like my case, so what happened:
- Charged this battery to 100% a day before the flight;
- The next day, I connected the battery and the RC showed me "BATTERY ERR", I checked the app and there was a message: "Battery Cell Error - Solution: to further confirme the health condition of your battery, do not power off the aircraft until disrchargin it to 5% after landing. Restart and sync the flight data and contact DJI Support soon."
- I also checked the battery status, but everything appears to be normal with the cells:
So, what I did:
- Discharged the battery til 5%;
- Let it "rest" for an hour;
- Recharged until 50% (storage mode) just to check it out and the error message was not shown anymore!
I wrote the DJI support and they kindly said that after 8 months my warranty is not valid anymore but I should try the following:
• Place the Intelligent Flight Battery into your aircraft's battery compartment and turn it on.
• Leave it on until there is less than 8% of power left until the battery can no longer be turned on.
• Launch the DJI Go App to check battery levels.
After which allow the battery to cool down and recharge them to full charge. Repeat the steps twice then insert it back to the aircraft and power it on.
My doubts are - Help is welcome:
- Should I worry about this one or keep flying (taking care about future errors, of course)?
- Anyone had sth like that before?
- Does anyone know the reasons for this error?
PS: I always take good care about my batteries like rotation, storage 45% to 50% charge, keep them in a cool place and time to time I check its status before flying.
Before writing this post, I dig into other "battery errors" on the forum but couldn't find yet something like my case, so what happened:
- Charged this battery to 100% a day before the flight;
- The next day, I connected the battery and the RC showed me "BATTERY ERR", I checked the app and there was a message: "Battery Cell Error - Solution: to further confirme the health condition of your battery, do not power off the aircraft until disrchargin it to 5% after landing. Restart and sync the flight data and contact DJI Support soon."
- I also checked the battery status, but everything appears to be normal with the cells:
So, what I did:
- Discharged the battery til 5%;
- Let it "rest" for an hour;
- Recharged until 50% (storage mode) just to check it out and the error message was not shown anymore!
I wrote the DJI support and they kindly said that after 8 months my warranty is not valid anymore but I should try the following:
• Place the Intelligent Flight Battery into your aircraft's battery compartment and turn it on.
• Leave it on until there is less than 8% of power left until the battery can no longer be turned on.
• Launch the DJI Go App to check battery levels.
After which allow the battery to cool down and recharge them to full charge. Repeat the steps twice then insert it back to the aircraft and power it on.
My doubts are - Help is welcome:
- Should I worry about this one or keep flying (taking care about future errors, of course)?
- Anyone had sth like that before?
- Does anyone know the reasons for this error?
PS: I always take good care about my batteries like rotation, storage 45% to 50% charge, keep them in a cool place and time to time I check its status before flying.
