Magic 2 zoom fly app problems

[Bear501]

I have not flown my mavic 2 and quiet a while. So when I went to fly with the old DJI app it would not connect. I tried a couple other apps from the Android play store and can't get them to connect either. I'm sure there's something out there that I don't know about because I've been out of the picture for so long. And I don't want to have to pay for a subscription just to get it after work. I have a litchi app that I downloaded a long time ago, would that still work?

 

[mavic3usa]

Only use the apps from here: Download Center - DJI

 

[Felix le Chat]

I have not flown my mavic 2 and quiet a while. So when I went to fly with the old DJI app it would not connect. I tried a couple other apps from the Android play store and can't get them to connect either. I'm sure there's something out there that I don't know about because I've been out of the picture for so long. And I don't want to have to pay for a subscription just to get it after work. I have a litchi app that I downloaded a long time ago, would that still work?

... OR... You can download older archived copies of DJI GO4 from Apkmirror. They are all the legit DJI versions that haven't been pissed about with.

Also: a word of advice concerning Play Store... if you have difficulty running certain (Chinese) apps on an android device - try turning 'Play Protect' OFF.

 

[Kilrah]

The M2 uses DJI GO 4, not Fly. And DJI apps haven't been on the Play Store anymore for a while.

DJI Go 4 - Download Center - DJI

Capture the world from above. Compatible with the Mavic Series, Spark, Phantom 4, and more.

www.dji.com

 

[KB9Radio]

You need the DJI GO4 app downloaded directly from the DJI website. They stopped putting their apps on playstore at least a year ago. Just download from DJI and you'll be all set, provided your phone is compatible. It's good idea when you upgrade your phone to keep the old one just for droning if it works good.

 

[Exphantomflyer]

The M2 uses DJI GO 4, not Fly.

You misread the post, he said he went to fly with the old DJI app, not that he used the DJI Fly app, its ok I did that as well

 

[Bear501]

Thank you for the links and information about the DJI go 4 app. I got it downloaded and working finally. I like how this community still helps out with even the simplest and stupidest problems.

 

[Kilrah]

not that he used the DJI Fly app

That's what the thread title says.

 

[PhoebeSnow]

Funny thing as I hadn't flown my M2Z in awhile either. Had issues, sent it to DJI for repair, and got it back in 10 Days. I was VERY impressed with DJI service for their speedy repair and many phone calls to see how well it worked for me. But my zoom works great and I must use it more.

 

[Felix le Chat]

Funny thing as I hadn't flown my M2Z in awhile either. Had issues, sent it to DJI for repair, and got it back in 10 Days. I was VERY impressed with DJI service for their speedy repair and many phone calls to see how well it worked for me. But my zoom works great and I must use it more.

It still is a fantastic drone carrying a stunningly good camera that is also the only consumer class drone to have a genuine optical zoom. My Mavic 2 Pro is great for quality 20mp stills... but the super-resolution pano shots captured by the Mav 2 Zoom are jaw-droppingly good.

 

[PhoebeSnow]

It still is a fantastic drone carrying a stunningly good camera that is also the only consumer class drone to have a genuine optical zoom. My Mavic 2 Pro is great for quality 20mp stills... but the super-resolution pano shots captured by the Mav 2 Zoom are jaw-droppingly good.

I agree! With the current tariff pricing and the new Mavic 4 Pro unobtainable in the USA my M2Z will serve me well. I do have the older Mavic Pro, Min 3 Pro and Mini 4 Pro but in a stiff wind here over Lake Ontario the M2Z has it's place. And even if the M4P was available in the US $2,200 is pricey.

 

[AMann]

I have not flown my mavic 2 and quiet a while. So when I went to fly with the old DJI app it would not connect. I tried a couple other apps from the Android play store and can't get them to connect either. I'm sure there's something out there that I don't know about because I've been out of the picture for so long. And I don't want to have to pay for a subscription just to get it after work. I have a litchi app that I downloaded a long time ago, would that still work?

Have you done any updates to enable RID on the drone? I’m not sure, but I wouldn’t be surprised if they are now requiring you to have that installed and enabled.

 

[PhoebeSnow]

Have you done any updates to enable RID on the drone? I’m not sure, but I wouldn’t be surprised if they are now requiring you to have that installed and enabled.

That was one of the reasons I had it repaired as it was RID compliant. Didn't want to add a new Holystone RID to it when it could be compliant already with just a download (unlike my Mavic Pro). I updated it and registered the RID on the FAA website

 

[AMann]

That was one of the reasons I had it repaired as it was RID compliant. Didn't want to add a new Holystone RID to it when it could be compliant already with just a download (unlike my Mavic Pro). I updated it and registered the RID on the FAA website

Well, that rules out lack of updates. Getting the app from DJzi as mentioned would be my next try. Also go through the reconnect procedure as if it is a new drone after you do that. My M2P works fine still, along with Litchi and VLM online.

 

[AMann]

Just saw this- apparently you’re not alone with this issue. one guy said the goggles still work with his, interesting issue…

J

Mavic 2 zoom disconnecting

Feb 9, 2021

Please help. My zoom has been disconnecting from the controller frequently over the past 3 weeks. Also started coming up with mag interference and imu issues. I’ve recalibrated compass and imu and installed latest updates to drone controller battery and app. Now it’s at the stage it won’t even connect to controller for more than few minutes. I can’t get response from dji support. I’ve owned the drone since new 2018 and it’s never been crashed or had any issues before this.
192.168.0.1 routerlogin 192.168.l.l

• jasonrealmen
• Replies: 9
• Forum: Mavic 2 Zoom

 

[Bear501]

Well so one problem fixed and another one pops up. Now the battery in my remote is junk. I started my flight with 68% battery and before my flight was even halfway done the remote was down to 12%. I know I can buy a whole new remote, but that's a lot of money for just a remote. Also I have my remote remote modified to have external antennas screw into it. Because I have it set up to attach to a antenna on my roof and I can fly from inside my house. So is there somebody out there that can replace the batteries in a remote or at least sell me some good batteries and I'll try to do it myself?

 

[Felix le Chat]

Well so one problem fixed and another one pops up. Now the battery in my remote is junk. I started my flight with 68% battery and before my flight was even halfway done the remote was down to 12%. I know I can buy a whole new remote, but that's a lot of money for just a remote. Also I have my remote remote modified to have external antennas screw into it. Because I have it set up to attach to a antenna on my roof and I can fly from inside my house. So is there somebody out there that can replace the batteries in a remote or at least sell me some good batteries and I'll try to do it myself?

It's an easy enough process. The video link will walk you through it

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

You may find that it isn't the battery that's causing the problem. There is a dedicated battery management chip on the controller core board and this has a tendency to burn out. You can actually purchase a genuine replacement chip, but the removal and refitting of the replacement isn't something anyone without micro electronics experience will be able to easily tackle.

Link below for the battery.

3950mAh battery for the Remote Controller of Mavic 2 Pro/Zoom

Replacement repair components spare parts for the remote controller of DJI Mavic 2 Pro and Mavic 2 Zoom. If your RC can not be charged or switched on, the problem may be due to the battery or the battery management chip. NOT fit Mavic 2 Smart Controller. Capacity: 3950mAh/15.129Wh, Size...

djioemparts.com

Link below takes you to the replacement I/C.

2 pcs BQ24259 Battery Charging IC for Mavic 2 Controller

Original and brand new replacement repair components and spare parts for DJI Mavic 2 remote controller. Package includes: 2 x chips

djioemparts.com

 

[Conservative Nihilist]

Well so one problem fixed and another one pops up. Now the battery in my remote is junk. I started my flight with 68% battery and before my flight was even halfway done the remote was down to 12%. I know I can buy a whole new remote, but that's a lot of money for just a remote. Also I have my remote remote modified to have external antennas screw into it. Because I have it set up to attach to a antenna on my roof and I can fly from inside my house. So is there somebody out there that can replace the batteries in a remote or at least sell me some good batteries and I'll try to do it myself?

I have long dreamed of flying my drones from the comfort of my living room, but I am not sure how long the cable can be before signal strength is reduced to an unusable level.

May I ask how high your antenna is above your house? Also, did you have to use in-line amplifiers to boost the control and video signals? I'd love to see some pictures of your setup if you can ever get around to it