Need Help barometer location?

[djfluent]

Im in search of this **** barometer on this mavic 2 drone for the life of me no one seems to know exactly which board this is on im getting an error saying barometer disconnected restart drone. Ive recalibrated bought a new gps/imu and main board, still with no luck getting her to take flight thanks for the help.

 

[buddb55]

Sorry for being stupid but there is a barometer on the 2?

 

[db4476]

Perhaps this will help. It most likely is on the main board, judging by the picture of a Mavic 2 pro circuit board below. In the badly drawn blue rectangle is what appears to be a barometer. They are almost always encased in a metal can with one or two holes in the cover allowing access to the atmosphere. I cannot identify the component in the photo. Just look for a metal can about 3mm to 5mm in size with a small hole or 2 in it.

Cheers!



Here's another pic:

 

[djfluent]

thank you ill look into that i replaced the main board with supposedly a good one but i may of been screwed

 

[Kilrah]

Here's another pic

That second one is a crystal oscillator, no hole, just a printed dot. First one is baro sensor though.

 

[db4476]

That second one is a crystal oscillator, no hole, just a printed dot. First one is baro sensor though.

You are correct! Should have looked closer.
Cheers!

 

[reactor]

It should be on the IMU board under a metal cap.