Hi to All wannabe drone fisherpersons!!
Here's a very simple way to take a fishing line to a likely fishing patch inaccessible by normal casting!
The attached pictures tell the story, so wont bore with too many details.
Just bend up some stainless brazing rod - (from local welding supplies shop)- to the shape and dimensions to suit your drone similar to the one shown.
Cover with heat shrink if desired. Attach to drone - Make sure to remove after use, before attempting to fold arms....(Repeat)
I have actually tried this and it does really work OK. Just make sure "sufficient" line flows easily from rod or reel. Use commonsense.
When drone is over the fishing spot. rotate drone 180 degrees (camera points back to you) fishing line loop drops off (or motor away from line) Rinse, repeat until time to change battery!!
Enjoy and welcome to any feedback!
Cheers - mereflyer
Disclaimer:
This info supplied as is - for your enjoyment only!
Be careful and you should have no problems.
No responsibility accepted for any incidents related to this article.
Here's a very simple way to take a fishing line to a likely fishing patch inaccessible by normal casting!
The attached pictures tell the story, so wont bore with too many details.
Just bend up some stainless brazing rod - (from local welding supplies shop)- to the shape and dimensions to suit your drone similar to the one shown.
Cover with heat shrink if desired. Attach to drone - Make sure to remove after use, before attempting to fold arms....(Repeat)
I have actually tried this and it does really work OK. Just make sure "sufficient" line flows easily from rod or reel. Use commonsense.
When drone is over the fishing spot. rotate drone 180 degrees (camera points back to you) fishing line loop drops off (or motor away from line) Rinse, repeat until time to change battery!!
Enjoy and welcome to any feedback!
Cheers - mereflyer
Disclaimer:
This info supplied as is - for your enjoyment only!
Be careful and you should have no problems.
No responsibility accepted for any incidents related to this article.
Last edited: