New firmware for the
Mavic 2 with increased transmission signal MAXIMA for FCC AND CE!
Launch of the new
Mavic 2 Pro / Zoom firmware (07/07/2020)
Aircraft firmware: v01. 00. 0670
DJI GO 4 iOS App: v4. 3. 37
DJI GO 4 Android app: v4. 3. 36
What's new?
Longer operating time of the remote control when used in low temperature environments.
The default automatic download settings have been updated to two days.
Fixed an occasional issue: the gimbal was unbalanced after the self-test. Use Auto Gimbal Calibration on DJI GO 4 to fix this problem.
Fixed issue: The obstacle avoidance switch was not available when using MSDK.
Maximum transmission distance increase: 10 km (FCC), 6 km (CE / MIC / SRRC).
Notes:
Restart the aircraft and the remote control after the update is complete.
Please note that the update can reset various main controller settings, such as RTH altitude and maximum flight distance, to default settings. Before updating, take note of your preferred DJI GO 4 settings and reset after update.
If the update fails, please restart the aircraft, remote control and DJI GO 4 or DJI Assistant 2 for Mavic, and try again.
This is the update information here in Spain / Europe.
Practically similar and identical.