MAVIC 3 RID issue

[FCFriedMann]

I have gotten this message a few times. last time after a 5+ minute flight. landed and then went to fly again and was blocked from take off due to RID fail. This message was in the logs. Not sure where to go with this one. Very aggravating. Any ideas. MAvi3 3 with DJI RC controller.

 

[js47]

There are definitely some RID bugs in my experience. I get that message whenever I turn the drone on first, rather than turning the controller on first and then the drone. Any chance you are turning the controller off between flights?

 

[BlueHeeler]

I have almost the same setup, as of today I have not had any RID issues nor warnings since that rule went into effect.
( fingers crossed )

 

[FCFriedMann]

There are definitely some RID bugs in my experience. I get that message whenever I turn the drone on first, rather than turning the controller on first and then the drone. Any chance you are turning the controller off between flights?

No, last time, I changed out the battery in the drone. But then could not lift. Seems alwayus to be ok for the first flight.

 

[anonim_bird]

With 1000 version I get this remote ID error when I far away and signal is 1bar. You should ignore it anyway because remoteID is not working on hacked version. Still with some WIFI Scanners you can pick up the RID transmission but it doesnt send any important data thats why smartphones app like dronescanner or openremoteid wont detect it.

 

[djiuser12345]

It sends out remote id.

And openremoteid can see it.

 

[anonim_bird]

I have tried few smartphones and tablets, none detects it in any situation.

 

[djiuser12345]

I have tried few smartphones and tablets, none detects it in any situation.

go try another 54954654 phones.

as long as you don't understand the basics you will fail.

I can see your drone.

 

[anonim_bird]

go try another 54954654 phones.

as long as you don't understand the basics you will fail.

I can see your drone.

What basics? You have magical smarthone?

 

[djiuser12345]

What basics? You have magical smarthone?

no, but I can still see your drone

 

[anonim_bird]

You wrote "opendroneID" app can see it. IT doesnt see my drone, so?

 

[djiuser12345]

You wrote "opendroneID" app can see it. IT doesnt see my drone, so?

yes, you are still wrong.

Just look at what the hack does.

 

[Thom_adams]

On DH Mavic3 remote id can be disabled with gps off command in the console. After command need to restart drone and rc

 

[djiuser12345]

On DH Mavic3 remote id can be disabled with gps off command in the console. After command need to restart drone and rc

I don't know your agenda but you are plain wrong, again.
with a different username. thats your third user account here, @MAVIC3_owner , @Thom_adams , @anonim_bird

Watch unnamed | Streamable

Watch "unnamed" on Streamable.

streamable.com

 

[Thom_adams]

I don't know your agenda but you are plain wrong, again.
with a different username. thats your third user account here, @MAVIC3_owner , @Thom_adams , @anonim_bird

Watch unnamed | Streamable

Watch "unnamed" on Streamable.

streamable.com

Because you doing it wrong. "GPS OFF" not "GPS_OFF" and need to restart RC As well.

 

[djiuser12345]

Because you doing it wrong. "GPS OFF" not "GPS_OFF" and need to restart RC As well.

And where do you have this from?
Because this is nonsense, every russian pdf and DH instructions says the commands are with underscore.

 

[Thom_adams]

And where do you have this from?
Because this is nonsense, every russian pdf and DH instructions says the commands are with underscore.

Amazing... I will make a video tomorrow how GPS satellites changes color from white to red with command "gps off", with "gps_off" nothing happens. I know what Russians says

 

[djiuser12345]

Amazing... I will make a video tomorrow how GPS satellites changes color from white to red with command "gps off", with "gps_off" nothing happens. I know what Russians says

today was a thread which just contradicts you, its a weird coincidence right?

 

[Thom_adams]

That works aswell with cine mode. GPS OFF command works too. Video tomorrow

 

[djiuser12345]

@GadgetGuy said it right

@anonim_bird Not being able to detect it yourself does not mean it isn't still transmitting and can still be detected by others with different equipment. Conversely, if anyone else can detect it, it clearly is transmitting. You can't prove a negative!