DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

New firmware: V01.03.0600

Yes, today was very odd. The first time was while I was still on the ground. The horizon tilted about 45 degrees to the left, then slowly started to correct. It took about 2 minutes for it get back to almost level - but it never actually got level. This exact thing happened mid flight as well. 45 degrees slant, but this time it never corrected. I had to land and recycle power.

Since I went back to .0550 I have flown 3 batteries now and the problem has not come back.

Looks like there is something wrong with the gimball control code, would be interesting to see if there are any others that have this kind of issues.....
 
Noticed a new firmware this morning with a new feature: Fixed-Wing mode. Haven't tried it yet, but sounds interesting. It's described in the new manual as:

Fixed-Wing Mode
The aircraft will fly forward automatically at a certain speed after entering Fixed-Wing Mode. Push the left
stick up to ascend and down to descend. Push either stick left or right to rotate the aircraft. Pushing the
right stick up will accelerate and pushing down will exit Fixed-Wing Mode.
In the DJI GO 4 app, tap the icon and enable Fixed-Wing Mode. Push the right stick up until the C1
icon appears, then press the C1 button on the remote controller to enter Fixed-Wing Mode. Push the right
stick down or press the C2 button on the remote controller to exit Fixed-Wing Mode.
Not sure what I would use this mode for. Any ideas?
 
Same here...wont update

When doing the firmware update and it gets to the part of updating NFZ, does it freeze on you? It does for me. Have yet to update then when I updated to .550 and .600
Once it stucks at that, just restart the mavic (and only mavic) the upgrade will continue.
 
1492285969932.jpg

Update went smooth. Updated to go the Go app first, restarted everything connected the mavic and updated that. Now I'm going to restart everything and take her for a test flight...
 
For those who have trouble to uograde - I had the same problem upgrading from .3 to .4. Tried everything but always stucked around 7x% in dji go or around 5x assistant (not sure if I remember correctly). Once it stucks (so it does nothing) just restart only the mavic (and only). The upgrade will continue.
 
Yes, today was very odd. The first time was while I was still on the ground. The horizon tilted about 45 degrees to the left, then slowly started to correct. It took about 2 minutes for it get back to almost level - but it never actually got level. This exact thing happened mid flight as well. 45 degrees slant, but this time it never corrected. I had to land and recycle power.

Since I went back to .0550 I have flown 3 batteries now and the problem has not come back.
Same here but I went back to 400 this new .600 update is a total disaster
 
  • Like
Reactions: Fly4grub
Looks like there is something wrong with the gimball control code, would be interesting to see if there are any others that have this kind of issues.....
I have the same problem here
 
Not sure what I would use this mode for. Any ideas?

As I'm watching the demo videos of "flight mode" coming out on YouTube, it seems DJI is trying to emulate an FPV racer-type flight, with the camera level fixed so when you bank the Mavic the image banks with you. Maybe this was intended more for the new Spark? It may also signal that the DJI FPV goggles will be out soon.
 
  • Like
Reactions: Slayerstwin
I think i will go back too, even if i do like the fixedwing and find my drone.....but do not worth the issues.
I'm not even sure that fixed wing mode isn't in the app rather than firmware, has anyone tried it with the latest app and older firmware?

I am back on .400 but haven't flown since rolling back.
 
Yes, today was very odd. The first time was while I was still on the ground. The horizon tilted about 45 degrees to the left, then slowly started to correct. It took about 2 minutes for it get back to almost level - but it never actually got level. This exact thing happened mid flight as well. 45 degrees slant, but this time it never corrected. I had to land and recycle power.

Since I went back to .0550 I have flown 3 batteries now and the problem has not come back.
I started having this problem today. How do i downgrade?
 
After upgrade in sport mode total crawling not the 46.6mph Ive seen before, odd.
 
Upgrade went through easily and after several flights I can't find any faults in the new firmware yet. All is good.
 
I have tried upgrading to .600 but have failed each time. I have tried both via app on my iPad and directly from Mac and it fails to install (uploading and transmitting ok). I am currently on .500 so I am wondering if I need to upgrade to .550 first and then .600? Or could it be that the cached download is corrupt?
 

DJI Drone Deals

New Threads

Forum statistics

Threads
131,611
Messages
1,564,558
Members
160,492
Latest member
djionas