New MA2 owner from the sunshine state (Florida)

[eaglesurfing]

Welcome to the forum and enjoy.

There are a few videos out about the changes.

 

[MORTON]

Welcome to the forum and enjoy.

There are a few videos out about the changes.

Thanks! Yeah I’m in research mode now. So much to learn.

 

[Drone Master]

Welcome to Mavic Pilots! Enjoy the forum!

 

[mrjohnc1]

Welcome!

 

[Thomas B]

Welcome to the forum from the deserts of Arizona! Enjoy.

 

[DanMan32]

Ah ha! Will do as soon as I get home! Thank you for the info! I was like how the heck can I fly this around without this info displayed haha I was terrified.

I didn't get so reliant on the attitude/orientation indicator and don't recommend depending on it.

The attitude indicator in Go for was cool, but hardly looked at it. As a matter of fact it was a few years before I figured out the attitude part of the radar. Often for orientation the device compass would be off calibration.
I've used the map sometimes for orientation though. Otherwise I'd see it VLOS, or figured out where AC was from landmarks in the live view.

If I really got lost, I'd use RTH to get it back close to me, then cancel RTH.

 

[Steel63]

Awesome! We used to live near there! I’ll be taking the MA2 to Jeep Beach this year in Daytona. Should be a good time as always! The main event is always inside the speedway. I wonder what permission I’ll need to fly one in there? Probably cant as it’s so close to the airport. I should at least get some shots out in town though at the other events.

I'm not sure if they will let you fly their but it doesn't hurt to ask ? good luck and have fun flying

 

[MORTON]

I didn't get so reliant on the attitude/orientation indicator and don't recommend depending on it.

The attitude indicator in Go for was cool, but hardly looked at it. As a matter of fact it was a few years before I figured out the attitude part of the radar. Often for orientation the device compass would be off calibration.
I've used the map sometimes for orientation though. Otherwise I'd see it VLOS, or figured out where AC was from landmarks in the live view.

If I really got lost, I'd use RTH to get it back close to me, then cancel RTH.

I tried it and you were right of course haha Thanks for telling me how to access it.

You’re also right, it’s a bit laggy and probably not going to be as useful as the old version I saw even though it appears people were having issue with that as well. It certainly isn’t exactly like the attitude indicators in an actual AC but it’s close enough haha

 

[Kendallfordguy]

Welcome from Wisconsin!

 

[Laborous]

Welcome to the forum from the beautiful woods of Maine!

 

[Chetk7677]

Welcome from central Florida.

 

[MORTON]

So even though I got the fly more combo which came with a nice soft bag. I went on Amazon and got this case. For as cheap as it was it’s actually nice. No movement in the box when shaking the box. It also says the landing pad can fit in it as well which is nice but mine hasn’t come in yet so the verdict is still out on that one. The box did smell when opening it a few days ago from the laser cutting process but I just sprayed some apple cider organic house freshener in it and let it dry in. Now it smells good haha What are y’all’s setups for transporting?

 

[Hauptmann]

Welcome to the forum, from Hauptmann in the friendly skies of North Texas!

 

[MA2 317]

What are y’all’s setups for transporting?

Here's mine.

Symik Mavic Air 2 FMC Hard Case

Hello drone pilots, new Mavic Air 2 pilot here and I wanted to share my new Symik FMC hard case with the Forum. It's a a little smaller than my Nanuk 915 Spark FMC case. Unfortunately, the Symik case is currently out of stock. ...

mavicpilots.com

 

[MORTON]

Here's mine.

Symik Mavic Air 2 FMC Hard Case

Hello drone pilots, new Mavic Air 2 pilot here and I wanted to share my new Symik FMC hard case with the Forum. It's a a little smaller than my Nanuk 915 Spark FMC case. Unfortunately, the Symik case is currently out of stock. ...

mavicpilots.com

Oh wow that’s nice too haha looks very similar to mine! Where did you get your FAA card?! I put my FAA number on the side of the drone and was reading that you have to have your FAA certificate with you which kind of sucks because mine will just be printed on paper..

 

[MA2 317]

Oh wow that’s nice too haha looks very similar to mine! Where did you get your FAA card?! I put my FAA number on the side of the drone and was reading that you have to have your FAA certificate with you which kind of sucks because mine will just be printed on paper..

I asked the secretary at work to make it for me.

We have employee badges with lanyards at my job so she scanned my certificate and printed a few of the badges for me. One in the Spark case, one in the MA2 case, and one in my wallet.

Before I had the badges made, I copied and laminated the certificate.

I used a label maker for my FAA numbers.

You can use a Sharpie pen and write the numbers on the aircraft if needed. The FAA didn't say how the numbers were supposed to be on there, just had to be there.

 

[MORTON]

I asked the secretary at work to make it for me.

We have employee badges with lanyards at my job so she scanned my certificate and printed a few of the badges for me. One in the Spark case, one in the MA2 case, and one in my wallet.

Before I had the badges made, I copied and laminated the certificate.

I used a label maker for my FAA numbers.

You can use a Sharpie pen and write the numbers on the aircraft if needed. The FAA didn't say how the numbers were supposed to be on there, just had to be there.

Ah makes sense that’s bad@SS man! Yeah I just used my label maker for on the drone itself but I only had standard tape so it looks like crap.. I ordered the clear tape with white lettering so I’ll replace it haha

 

[MavicAir2Hal]

Hello everyone just checking in from Florida! New MA2 here! Hope everyone’s holidays went well!

I was in Boca Raton flying my Mavic Air 2 in November

 

[MORTON]

I was in Boca Raton flying my Mavic Air 2 in November

That’s a beautiful place down in south East FL for sure!

 

[MORTON]

Got a nice little QuickShot test today but I failed to go into the settings and so I’m not sure what it recorded in. I assume 4k however YouTube seems to only allow up to 720p? Strange.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies