Repaired Mavic Pro had to be re-connected

[catshepheard]

Ok, it happened; I crashed my Mavic and had it repaired by DJI on the left-coast. After 3 weeks, the Mavic arrived. I first had problems connecting the RC. No connection so I reloaded the DJI Go 4 Android app. Had to go through the initial stuff including the Firmware. Now it's connecting. Next was testing the return to home; accuracy was terribile, no where near the take off point. Well since the repair was in the west and I'm here in the east, I decided to do the compass and IMUs. I found the YouTube instructions but found the DJI app must of been changed, the guide to the operations was not what I saw. I finally got everything calibrated and now all is well.
Some cautions on returned Mavics. Don't Panic!
1) It may not connect.
2) Re calibrate the compass and IMU

 

[Haloweenhamster]

Likely swapped for a refurbished one so you will have to relink to rc

 

[Bernie707]

Makes sense you'd have to reconnect. Glad to hear the IMU and compass calibrations made everything right.