Just bought a brand new A2S from B&H with the RC Pro along with a new Sandisk 256 Ultra SD card. Charged everything, did all the firmware updates, checked all my remote settings, etc.. SD Card went from the packaging straight into the A2S and was immediately recognized. I set the default to the SD card and formatted the card as well as the internal memory to ensure everything was clean. Went out for it's first test flight today and flew about 45 minutes. Got home and put the SD card into my laptop and it said that the SD Card needed to be formatted.
I've seen several incomplete threads here regarding the same issue. Some say to format it in the PC and not in the drone as the "solution" however is there a real solution? Looks like this was reported several months ago and there has been at least 1 firmware update for the drone since the reports. Anyone know if there's been a real fix?
I've seen several incomplete threads here regarding the same issue. Some say to format it in the PC and not in the drone as the "solution" however is there a real solution? Looks like this was reported several months ago and there has been at least 1 firmware update for the drone since the reports. Anyone know if there's been a real fix?