Hi everyone,
I bought a Mavic Pro three weeks ago and what an amazing bird! I took the time to read a lot of things about it, how to set it, to calibrate it, to use it the right way..And people from this forum helped a lot! I didn't want to crash it or to miss something from the config.
During those 3 weeks, everything was fine. Flew a lot, never had any issue.
This week end, I decided to update the drone (firmware, RC and battery). I did the update from the app without any issue. It took some time (maybe 40 min, it failed one time during the download).
My current state is:
- Drone: 1.04.0000
- RC: 1.04.0000
- DJI Go App: 4.1.18
After the update, I went to a big park near my place where I usually train to fly, to check the drone and unfortunately I noticed multiple issues:
I use a dedicated Nexus 7 2013 to fly. I'm on Android 6.0.1(Marshmallow). Before installing the app, I've done a factory reset of the tablet. So, the DJI Go app is the only app running on it.
I read a lot of threads about that kind of issue and I'm not sure about what to do or where to start. I'm thinking about:
Thanks a lot in advance.
Versions:
Versions All
Blurry/black video feed screen:
Bluerry Screen 02
Bluerry Screen 01
P.
I bought a Mavic Pro three weeks ago and what an amazing bird! I took the time to read a lot of things about it, how to set it, to calibrate it, to use it the right way..And people from this forum helped a lot! I didn't want to crash it or to miss something from the config.
During those 3 weeks, everything was fine. Flew a lot, never had any issue.
This week end, I decided to update the drone (firmware, RC and battery). I did the update from the app without any issue. It took some time (maybe 40 min, it failed one time during the download).
My current state is:
- Drone: 1.04.0000
- RC: 1.04.0000
- DJI Go App: 4.1.18
After the update, I went to a big park near my place where I usually train to fly, to check the drone and unfortunately I noticed multiple issues:
- The video feed is very very bad. The two thirds of the screen is black, very pixelated, can't see anything (see photos below). I double checked the transmission signal between RC and Aircraft, everything looks fine,
- I have an error message when the drone takes off saying "Error code 110: failed to take off, please contact DJI Support", but the drone is taking off without any issue and I can control it without any problem. Just after the warning message, I have another message (green) saying "takeoff successful",
- I lost the signal between RC and Aircraft randomly.
I use a dedicated Nexus 7 2013 to fly. I'm on Android 6.0.1(Marshmallow). Before installing the app, I've done a factory reset of the tablet. So, the DJI Go app is the only app running on it.
I read a lot of threads about that kind of issue and I'm not sure about what to do or where to start. I'm thinking about:
- Downgrading the app to 4.1.10? I saw on different forum that people have issue with the latest version on DJI Go app,
- Doing a factory reset using DJI Assistant 2? Will it rollback to the firmware installed on the drone when I bought it? I'm not sure if it will work, lots of people are saying it changes and/or does nothing,
- Downgrading the firmware to a previous version using DJI Assistant 2? If so, which one? If I do that, do I have to downgrade the RC to the same exact firmware?
- I’m on the latest (and buggy) 1.04.00000 firmware now, but is there a way to know what was the previous one, before the update? I forgot to note the previous version..
Thanks a lot in advance.
Versions:
Versions All
Blurry/black video feed screen:
Bluerry Screen 02
Bluerry Screen 01
P.