DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Holy Stone RID on Mavic Pro: photos wanted

AdamBolonsky

Well-Known Member
Joined
Sep 14, 2019
Messages
49
Reactions
16
Age
28
Location
Gloucester, Massachusetts
Because I do a lot of conservation mapping work with my Mavic Pro, I need to be in compliance with all FAA regs each time I launch. Can anyone provide photos of what the Holy Stone RID looks like attached to their Mavic Pro?

Used Holy Stone RID's are showing up on eBay these days for under $70.

Thanks in advance....
 
4014907177.jpg
 
I did some searching to make sure it didn't interfere with anything and came up with this.
Have flown several times and it works fine.
 

Attachments

  • 20240422_085619.jpg
    20240422_085619.jpg
    1.6 MB · Views: 33
Just make sure you throw away the Velcro that came with the RID and get some very good Velcro or you will loose the RID
 
Here is my Holy Stone RID on my M1P. I agree with Greg S regarding the velcro. I used a 3M locking tape shown in the photos. It is 1/2-inch wide so I have 2 strips next to each other.HS RID.jpgtape 1.jpgtape 2.jpgtape 3.jpg
 
Thanks, Howard. I'll look for that 3M Dual Lock. The key is not only the hook-to-loop strength but also the adhesiveness of the glue holding the strips to the drone, right?
So what's your take on the adhesive?
 
Holy Stone is currently selling new modules on eBay for $66, so probably makes more sense to buy new instead.
Of course they are selling them at $60. That's because I bought mine at $99.
 
Lycus Tech Mavic Air 3 Case

DJI Drone Deals

New Threads

Forum statistics

Threads
131,256
Messages
1,561,383
Members
160,207
Latest member
bullet_magnet