Welcome Mavic Pilot!
Jump in and join our free DJI Mavic community today!
Sign up

How to put gimbal back in when i pops out of the rear antidrop hook

Kingkong

Well-Known Member
Joined
Mar 5, 2017
Messages
60
Reaction score
26
Age
39
Had a wild flight today which i.ll explain in another thread it ended with a lost and then found mavic

But i.ve found the gimbal has popped out from the anti drop hook

I can t seem to get it back in

Would appreciate any help

Otherwise the gimbal seems to function normally, i have.nt flow it again but it shows pictue and stabilizes
 

Attachments

Bunny Too

Well-Known Member
Premium Pilot
Joined
Feb 7, 2017
Messages
5,279
Reaction score
2,129
Had a wild flight today which i.ll explain in another thread it ended with a lost and then found mavic

But i.ve found the gimbal has popped out from the anti drop hook

I can t seem to get it back in

Would appreciate any help

Otherwise the gimbal seems to function normally, i have.nt flow it again but it shows pictue and stabilizes
The way I do it is to take it out of the front two tabs, put it under the rear tab then back under the front two tabs. Good luck.
 
  • Like
Reactions: Former Member

msinger

DJI Drone Expert
Approved Vendor
Premium Pilot
Joined
Oct 12, 2016
Messages
20,842
Reaction score
11,272
Location
Harrisburg, PA (US)
Carefully slide that bottom black plate forward and you'll be able to tuck it back under that hook.
 

Kingkong

Well-Known Member
Joined
Mar 5, 2017
Messages
60
Reaction score
26
Age
39
Never mind i figured it out. U have to pull the gimbal right back so that the front mental tabs can be pulled right out of the housing this allows you to tuck the rear metal plate edge under the hook and then you can get the front metal tabs under the housong again.

I.ll leave this here in case it helps someone in the future
 

Kingkong

Well-Known Member
Joined
Mar 5, 2017
Messages
60
Reaction score
26
Age
39
Thanks guys crazy story to follow in a bit
I.m going outside to test
 

Former Member

Well-Known Member
Joined
Dec 20, 2016
Messages
14,022
Reaction score
13,026
Location
Duluth, Georgia
To anyone who tries this, be VERY careful when trying to reseat the gimbal plate under the hook. If you put too much downward pressure on the plate, it could easily break the hook and then you will have to completely disassemble the Mavic and drop the gimbal to replace that tiny little part.
 

New Threads

Forum statistics

Threads
71,737
Messages
831,371
Members
98,784
Latest member
Kcareaff