Mavic air 2 switch to FCC mode using an android app

[staffydog33]

Works PERFECT with Samsung Galaxy S24 Ultra Android 15 on DJI Air 2S

 

[Rolandmavic]

Has someone tried the hack with litchi yet?

 

[Enzo CaricoTri]

Works PERFECT with Samsung Galaxy S24 Ultra Android 15 on DJI Air 2S

I just tested my DJI Air 3 S and it works great. ( DJI RC-N3 )

 

[staffydog33]

I just tested my DJI Air 3 S and it works great. ( DJI RC-N3 )

Well worth the price - I am a very happy bunny ;-)

 

[martre]

I have a very strange issue here with mini 2 old firmware, with CE my signal is good for 1km , with the hack I can confirm FCC but the signal is lost in 100 mt! How is possible?

 

[hoshi12]

I didn't want to use another app (no offence). But I had Serial USB Terminal - Apps on Google Play already installed.
That is a USB to serial app that can send commands via hotkey.

One time setup:

1. download the app
2. on the lower part of the screen you got the hotkeys. Long click on one and add a name
3. Change "Edit mode" to "HEX"
4. Change value to
   550d04212a1f00000000018620551804200209000040092700024800ffff0200000000811f
5. click the check mark on the top right
6. click the 3 lines on the top left and hit "Settings"
7. make sure it is 19200 - 8 - None - 1

To launch the exploid:

1. Open App
2. Hit the connect button on the top right
3. Hit the hotkey once
4. done

This seems to work even if the controller sends garbage to the app.

 

[Rolandmavic]

db just tested my DJI Air 3 S and it works great. ( DJI RC-N3 )

Does someone know why in FCC mode with MP1 MP2 the line is above the 90db mark and with the new controllers it is opposit? FCC line under 90db mode?
Roland

 

[masterblaster16]

Leider Funktioniert die App nicht mit der DJI Mini 5pro und den RC N3 Controller.

 

[Larmada]

Is there a working hex command to send via serial usb to activate FCC on Mini 3 (base)?

 

[Ryanover]

Where can I get the FCC mode app for my S24 to work on my Air3S, I have RCN3 and RC2 controllers. Ive tried a ton of different patches, havent had anything work and Drone Tweaks doesn't work on S24 cant open it. Any help would be greatly appreciated!

 

[djimini3]

Does someone know why in FCC mode with MP1 MP2 the line is above the 90db mark and with the new controllers it is opposit? FCC line under 90db mode?
Roland

i see 2 usb 1 and 2 they are the same, what i must chose ?