DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

firmware

  1. D

    SController incompatibility with DJI Fly 1.2.1?

    I have received a replacement Smart Controller under warranty for this issue. The issue was, when connected to the Mavic Air 2, the live camera view is black. The Transmission Tab shows no data. Yet I can take photos and video, and can play them back from the saved images using DJI Fly. When...
  2. K

    Drone got crazy and crashed after RTH! Possible warranty? [log inside]

    Hey everyone! Unfortunately, the worst has happened and my dear Mavic Air 2, only a week old, got crashed... Would like to understand whether I can activate the warranty and other repair options. How it happened: I was flying in the park, open area but with some trees around. I was after 10pm...
  3. RPSM

    Mavic Air 2 - Battery Error 110024

    Hi - this week two of my batteries for my Mavic Air 2 started acting weird. First, when inserted into the drone, it immediately powered on without having to turn the battery on. Turning it off and on had no effect. When attempting to fly it (keeping it at the lowest possible altitude, to test...
  4. JoeGiral

    M2P videos keep stopping: smart controller goes to home screen

    I've read similar posts but find it frustrating that I can't resolve this. I bought a Mavic 2 pro and smart controller about a month ago with few if any problems. Since the last firmware update, the video STOPS RECORDING within 15 seconds and controller goes to 'go fly' screen. Over and over...
  5. iamsmarkus

    Where is firmware v01.00.0750 for DJI Assistant 2 For Mavic?

    Hi, I have the FPV goggles and I'm trying to connect it to my smart controller by this guide: DJI Digital FPV System HDMI Output Tutorial It references a firmware number that is: v01.00.0750 I've donwloaded the latest version of DJI Assistant 2 For Mavic, but latest version is: v01.00.0700...
  6. volition

    Wishlist? What firmware functions do you want for the MA2

    I have had the drone for over a week now and I have a few little gripes. The drone is fantastic, adding zoom & advanced gimbal settings this week, well that was cool. So what is everyone’s Wishlist. I’ll edit this post as worthy replies come in and are liked enough times, My Wishlist 1. Route...
  7. anon67

    Issues with sports mode after firmware update?

    Anyone else notice the MA2 flying differently when in sports mode after this new firmware update that added zoom among other things. It seems the drone is tilting more to the side when "strafing and turning at same time", just doesnt seem as smooth when visually watching the drone maneuver, not...
  8. Keule

    Mavic 2 Enterprise series firmware update 01.01.0700 (Jun 10, 2020)

    ALCON: Date: 2020.06.10 Mavic 2 Enterprise Aircraft Firmware: v01.01.0700 Mavic 2 Enterprise Dual Aircraft Firmware: v01.01.0700 Remote Controller Firmware: v01.01.0410 DJI Pilot App Android: v1.8.0 DJI Pilot App iOS: v1.1.3 What’s New? Improved the denoising and sharpening effect of...
  9. rafare

    Poll: Mavic Mini v500 firmware update how much issue-free users?

    I really wanted do know how many of you guys had no problems with the new firmware update.
  10. RonanCork

    DGI GO 4 app: New release worth upgrading to ?

    Hey Guys (sorry if this has been posted already) Anyone update to the latest DGI-GO-4 app ? Looks like it's just a dual remote controller update. Is there anywhere that shows a list of app release with their release notes ? (i.e. so we know if it's "worth" upgrading to). I bought my drone in...
  11. K

    Mavic air yaw 2019 FW .620

    I had an issue with my drone yaw to the left. It yaws when ascending. Also tried to make it stationary with no issues. But when i flick the left joystick UP even just a little bit. It starts to yaw to the left. Tried restore default. Refresh firmware, imu, rc calibration and rc link. Worked...
  12. S

    Mavic Pro Platinum Coreboard A bricked

    A few weeks ago, I bricked the coreboard A in my Mavic Pro Platinum while trying to flash firmware 1.03.0700 using DUMLdore. When the "bricked" coreboard is installed, the mavic can turn on but won't connect to the computer or remote, and the LED's are red. At the time, I didn't know that...
  13. M

    Can We do Flips in Sport+ Mode?

    To all firmware modders and parameter patchers out there As you might well know there is the so called Sport+ mode. And of course you are free to pitch the parameters further up. So if you pitch them up you might get to a stability boundary allowing for severe control "mistakes" such as flips...
  14. O

    Firmware Update Fail - Network Disconnected - Restart Equipment

    OK, for my first post I may be repeating stuff found elsewhere but I searched here to no avail. And I apologize too if this is too wordy. I searched for many hours in many resources so hope including as much detail as possible might help someone avoid that chore. I opened my Mavic 2 Pro...
  15. J

    can any one help. might of bricked my drone doing a roll back

    hi new to the forum and praying some one can help me. ive just followed digdat0,s guide to roll back the firmware and change the perimeters but i made a mistake and didnt realise i was ment to add an internal sd card i tried to flash it twice both times stopped at 82percent then it would no...
  16. P

    Help! Mavic Pro RC not working

    Hello there! So today for some reason, my rc and ac couldn't connect. The rc got stuck in 'connecting' and the ac kept flashing yellow. I thought that maybe it was a firmware thing, as every attempt to reconnect them failed(the controller wouldn't enter the 'binding' mode, when I did the 'rc...
  17. R

    Thoughts on hacking Mavic 2 NFZ/HEIGHT/SPEED...

    Everyone knows the M2P M2Zoom are much advanced models compared to M1P. However, the M1P is still the only choice if you want to modify it to unlock the height/NFZ restrictions. So here is the question: is it possible that someone will soon come up with a solution for removing NFZ and...
  18. L

    So I'm sending my MA back for a refresh...

    I have had my MA since February, but that last firmware made it start losing connection, random yaw movements, random fly away, blah blah blah. I have been advised by support to send it back in and get a new one under the DJI Care deal. My question is, how many people , have gotten one since...
  19. I

    Concerns over firmware

    I bought my AIR a while back and was immediately spooked by the comments that seemed to suggest the firmware was flakey. I did the dilligent thing and watched lots of videos on how not to lose the drone. I've had the drone out just 3 times and flown for all of 20 mins. During this time I've...
  20. E

    New firmware - IMU calibration and other issues

    1. Just updated to newest firmware. Afterwards I have had several issues - drift during flight amongst them. I am calibrating the IMU according to DJI´s video instructions - it remains stuck on step 2 - any solutions ? I have watched the recommended video, done precisely as it recommends, but...