camera

I recently bought a Mavic off of eBay but I’m not sure if something’s wrong with the gimbal. It seems pretty loose when it’s off to the point where if I hold it side ways it turns and hits the side. Not sure if this is normal or not

Hi Guys, I look after my Mavic Pro like a fanatic, always keeping it in a case, keeping it well away from dirt and dust etc. But over the last few months I have noticed that I have spots/marks across my photos and video. This only tends to be be really noticeable when I create HDR photos from...

After I crashed my Mavic Pro Platinum a month ago and nothing except for the plastic parts broke, I ordered the parts and replaced the mainframe and top frame, as well as both rear arms myself. Everything worked as expected, although the gimbal didn't move at all. I replaced the ribbon, which...

I was flying my new Mavic Pro the other day and suddenly the video started shaking weirdly as shown in the video linked below. I checked the gimbal and it was unobstructed (but I still had the little sticker with the tab, could this be an issue?). The rubber thing (vibration plate) was properly...

Hey peeps, I had a Mavic 2 pro, everything was fine until the day came. My Mavic 2 pro fell into a freshwater lake in Arkansas. I sent it to DJI but they wouldn't even touch a water damaged drone. So i didnt know what to do for the last 6 months and just kept it stored...

Everything else on the mavic works fine. The camera stays facing down when off though. I can move it in any direction manually but will center itself facing down. When I turn it on it positions itself normally and works normal. Only when I fly and move it around the camera drifts and faces down...

Sometimes when stopping or letting off the sticks suddenly at full speed the camera will force itself down or shift down from the stop, causing me to have to move the camera to regular position using the remote. Just happened the other day when stopping. I don’t typically stop suddenly, but let...

Hi all, I remember reading in a post somewhere that to solve the camera gimbal error status/compatibility issue when changing to a new gimbal the replacement gimbal must have the same ID prefix stamped on the gimbal circuit board. Can anyone point me to the post or can confirm this is true? I...

I posted this in the DJI MA forum couple of days ago but could not get any replies. I just wanted to try my luck here, in case there is a solution: Couple of days back I was out for some sunset videos with my camera when I realized that I forgot all my batteries home. I already had the MA in...

What are the best manual settings for trying to capture fireworks displays?

hi, i wonder what i am doing wrong, i think photos i take whit my mavic look bad, or is this normal ? i think they look blurry, i have played alot of round whit diffrent settings, resetting all of the settings and recalibrate everything

Hello Mavic Pilots - I'm new to the forum; signed-up to evaluate the M2P before possible purchase; currently own P3P since 2015. the camera, gimbal, sensors, small size and sturdiness of the M2P got my attention. Have already read quite a discussion of the P4P vs M2P regarding the camera and...

Have read a number of discussions on the Mavic Pro series REQUIRING you to tap the screen to focus the camera. Is this truly the case. AND now with the MP2Zoom, is this also the case or does the new feature of autofocus eliminate the need to take that additional step of touching the screen to...

I was in the mountains yesterday and was going to do some flying, but the camera would not stabilize. Symptoms: Camera slams to the up down limits every 30 seconds or so. On the screen of FPV I kept getting a warning that the gimbal lock was in place, Gimbal Obstructed, but it was not. I tried...

Hello all! Does anyone happen to know approximately how much area the Mavic Pro covers at 400ft? I have a project where I am going to monitor traffic patterns and need to figure out how much area I can cover while shooting video. I can test it tonight and measure it on Google Earth if no one...

You are all ready to go, the light is perfect, the sky and landscape look amazing but when your Mavic booted up there's weird blur, like the kind used to do a miniature effect with tilt shift lenses. You follow the guidelines and forum suggestions of resetting the camera, re-calibrating...

My Mavic's gimbal and camera suddenly started to go nuts on start up, this would stop and then repeat every 30 secs or so (my Mavic has never had any crashes or hard landings and has only been flown about 8 times) I replaced the ribbon and put it all back together and it appeared to fix it...

Bit of a long story but I figured Id explain the problem, how I got here and what I've tried so I don't waste anyone's time.. Crash from a great height a few months ago... replaced the following 1. Both arms on the right side (front and back) 2. Gimbal shock plate Afterwards I occasionally got...

Has anyone else experienced the D-Cinelike profile being switched to standard when a Quickshot is initiated? This is with a Mavic Air.

Hi All Sorry this is my first post but I've been searching the web to find a problem similar to mine and have had no success, I use my mavic pro recreationally but also for a few commercial jobs both video and mapping. I've had it for over a year now and it's been working well aside from a few...