gimbal

I had a slow sideways crash at 5 feet. After witch the gimbal is getting stuck when I pan down to 68 degrees. Once there it becomes overloaded and is stuck. It will then jump to 30ish degrees until finally resting to zero. I have normal movement from +24 to -68. It appears to reach 90 degrees in...

Hello guys! I'm new into posting any threads but here's my first. I've got a problem with my Mini, when I turn it on, it works normally, the gimbal starts moving/checking all axels but it gets stuck to the right/left. I had a small crash, where I did get sand in the gimbal. After a deep clean I...

Hey all! The gimbal on my mini 2 always tilts to the right. It doesn't get stuck, it works keeping the image flat when I fly my mini sideways, but the horizon is always slightly unlevel. Tried calibrating it a few times, also did the IMU calibration, doesn't help — at first the horizon is...

So the inevitable happened to me last week and I crashed my drone breaking my dji mini 2 arm and my gimbal has started shaking up and down which is the more pressing issue for me. DJI fly will not let it recalibrate and I cannot rotate up or down. I contacted DJI support, but they were very...

Greetings, So the other day my gimbal stopped working out of nowhere, I did not crash or anything either. It does its normal start-up but once that is done it won't do anything, can't control it from the remote either. If you put your ear up to it, it makes a scratching noise as a dirty cd...

I’ve seen online that the Mavic 2 Zoom and Pro gimbals can be interchanged. However I haven’t found any updated info on whether this is still possible in 2022. I’m worried that DJI has locked this feature behind firmware (like apple does with parts from different phones) Anyone have recent...

Hi all, I have replaced my mavic 2 pro gimbal after a crash. New gimbal after turn on calibration has a 45 deg offset in yaw and 6 deg offset in roll. I tried manual calibration gets stuck on 20%. tried IMU calib and MAG calib didnt help. the offset manual fix in the app is up to 10 deg for each...

Hi all, I've been noticing an issue with my M2P, which seems to be getting more noticeable - the camera when pointed straight down doesnt seem to be fully level/flat. I believe this is the case because: 1) in post production when rotating the photos, there's a tilt, by which one way looks...

Hi everyone! Hope you all had a great start into 2022! I have noticed something weird with my Mavic Air2 several times now. I've had it for half a year now and never crashed or dropped it. Since last month, the gimbal sometimes suddenly tilts down while flying backwards. I will try to attach...

Hi guys, Unfortunately, I could not fly the aircraft yet due to rainy weather. That didn't hold me back though from unboxing it and setting it up. I also made some recordings indoors. What I have noticed is that the gimbal (horizon) of my Mavic 3 tilts to the left and to the right by itself...

My Mini's gimbal is malfunctioning with a fast vibration of the camera when I power it up, it also no longer pairs with the controller (I use an iPhone 11 with it). I updated the Mini software and Fly apps last week, and tonight took the Mini up for a quick flight. Everything was normal, it...

Have you seen this issue before? Any idea what causes it, and how to make it never happen again? It really drained my confidence and made for a nerve wracking rest of the flight. No fun! Problem? I am still new to the mavic pro (but not drones in general); looks like i have right around 5hrs /...

I've had my Mavic 2 Pro for a couple years, rarely if ever calibrating the gimbal, but lately it's been getting misaligned (crooked horizon) often. At my last shoot, it happened 2 or 3 times: horizon was crooked, I ran calibration, then it was fine. I haven't had any collisions or anything...

Pretty much what I wrote in title. It seems to be touching the plastic part under the gimbal. Is it something I can fix myself?

Hello. I am a relatively new pilot and bought a Mavic Pro with the infamous Gimbal Overload error, and a flex cable. I successfully repaired the flex cable, and it stabilizes, but I lost the video feed. I get no errors from the app, and am pretty sure that the camera itself is OK, so I presume...

Hello all. Had a minor crash yesterday when prop clipped a tree branch. MVP2 fell and landed on it top. Had to replace a prop and the gimbal center hub had popped slightly out of place. I was able to center it and get it back in place but there is a small gap. Everything seems to function...

Today I took my Mavic Air 2 out for a debut flight and it was a wonderful experience. The footage is stunning and it's an absolute pleasure to fly. One thing happened that was concerning...when taking off after a practice landing, I noticed that the video footage was jerky, like on a budget...

Heya everyone: Again forum-fu search not strong failure here. The Mavic Pro M1P has a 3 axis gimbal, and as I understand it, full control of this can only be achieved using goggles. This was the statement many years ago. What has changed since then -if anything has- to allow full control of it...

Hi all, sorry for yet another mavic mini gimbal stuck thread. But I haven't been able to find a solution to my problem after trying all of the fix on the forum and youtube. One of the main difference between my error and the others is that I'm stuck on 0% when trying to calibrate the gimbal...

I've been searching the internet for weeks now but found no solution or any cases of my exact problem. I would like to know if any of you have experienced this and how you solved it. After having my Mavic stored for 3 months I tried to fly it for the first time but noticed the feed was shaky...