Had a strange gimbal failure yesterday while using Active Track. As the subject changed directions and started running, the Mavic seemed to just barely maintain its target, but before it could start moving the gimbal threw itself into an awkward angle and got stuck.
Here's the video: Dropbox -...
Hello It's my first time posting... I am trying to understand what parts on my Mavic may be broken... I had someone kick my Mavic across a gravely paved road... I was about to fly and had the gimbal cover off and the gimbal and fan area took most of the damage... I have straitened out the grill...
Can someone who is currently fixing a torn gimbal ribbon lay it flat folded & post it?
Every YouTube video, every single one of them is terrible.l. It's connector number two where everyone has the problem and that's where the mistakes are as far as the slack. It's amazing! The people that made...
Had the drone only a week and crashed it straight into a tree.
I Tested it after the crash and it had gimbal overload, clearly saw ribbon cable snapped. Camera was all working. Replaced gimbal ribbon cable very carefully making sure not to pinch the video or ribbon. Putting it all back...
Can someone help me determine if my gimbal has a horizon level problem. The gimbal tends to turn sideways when turning left or right especially with both sticks, it's almost always never level when turned. Also, not in this video but it sometimes shakes mid flight. Can anyone assist?
Dropbox -...
Hey everyone,
I'm looking to purchase a more versatile and user-friendly replacement for the gimbal clamp and protector. I came across the Teenitor clamp/protector and it looks perfect as it is a single unit that replaces the two seperate clamp/protector that comes stock.
Only issue is that...
First time poster, long time reader here.
My mavic is about 2 months old, and has never been wrecked or even came close to being wrecked. It has been perfect up until about a day ago. At roughly 1/5 down according to the app, my gimbal gets stuck on something. When it gets stuck, the camera...
My Mavic Pro started having these errors and they occurred even without any phone connected to the remote. After that I tried to recalibrate the gimbal and he made a sound like a dentist's drill and the gimbal got so hot I could barely touch it. I turned off the drone immediately and now I'm...
I bought a mavic with a non-working camera and am trying to fix it. When I bought it, the ribbon cable (flat) was broken going into the gimbal. So I just replaced that and am still not getting video feed or photos on my galaxy s7. I have tried the cable provided with the remote and a different...
So I replaced both the silver wire and the ribbon cable to my mavic gimbal after I had a bird drop my Mavic from about 150' up. After replacing the ribbon cable the mavic gimbal moved fine but I wasn't receiving any video transmission. I then replaced the silver wires to the camera and now I can...
Hi guys,
recently I crashed my Mavic and on first sight LSVD (video signal silver cable) was ripped off and vibration plate was broken. At that moment I didn't see that ribbon cable has been ripped too. I have order replacements part (LSVD cable and plate) and that came to me after 3 weeks. I...
Dear community. I purchased my mavic from someone. Today I found out that the setting was at -0.5 at the gimbal roll. Shouldn't it be 0.0 if everything was okay?
Thank you in advance.
Hello community,
I wanted to share this video with you, because my mavic did something odd today. During my flight after gaining some altitude my mavic seemingly had a problem.
Could this be related to high winds or was it a gimbal problem?
Any help is appreciated!
Hello!
my Mavic is about 4 months old, done 76 flights, 130 km, survived several crushes.
bird always travels with an original gimbal lock protector in a dedicated padded case.
the issue: some time ago I've noticed the camera isn't completely level. it's tilted right to some degree.
those...
Has anyone experienced these horizontal vibrations/blurring like on my attached video?
I have noticed that my Mavic's camera or gimbal sometimes produces these horizontal vibrations/shakes. Flown 4 hours so far and it happened 6x times. It usually lasts for 1-2 seconds.
Calibrated the gimbal...
Video below. My gimbal will not get past initial calibration, error is gimbal motor overload. It starts up, moves up down, then stops pointing down and to the right. I have read of the numerous other users with somewhat similar problems, but the only difference I believe is mine doesn't turn...
I'm on vacation in Europe and crashed mavic into a tree and it fell to the ground about 20 feet. I have Care refresh but I would appreciate some help because I'm going to Sicily in 3 days and really want to use the mavic and can't get it returned in time for vacation videos. Gimbal seems to be...
After a small crash, maybe 3ft off the ground going maybe 2mph... I clipped a propeller and my mavic fell to the ground. A small scratch on the undercarriage, and one cracked prop later, everything seemed fine... until I tried to fly again. I have NO CONTROL over the Gimbal and it says motors...
Hi there,
I'm new here so firstly I would like to say hello. My name is Brett Greenwood and I live in London, I am new to owning a Mavic Pro and so far I think it is superb! I have however already realised how easy it is to damage, lose or leave the gimbal clamp on, but also realise that it is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.