gimbal

Hi all, New Mavic owner here. Searched the forum and haven't seen a solution to jello with the drone LANDED and props OFF. Heres a sample: As you can see, there are severe stabilization issues even when the drone is not in flight with the props off, resting on the ground, minimal to no wind...

What firmware are you currently flying on or last used? Any issues? I am on v01.04.0000 Once in a while I will get the gimbal "freakout" while in mid air. I usually land, turn Mavic off and back on, and everything is fine again.

I just opened the new mavic but it gives me this error (IMU Calibration, Accelerometer Failed, Gimbal cannot receive MC data.) How can I resolve?

Hi everyone, ***UPDATE*** I've contacted DJI. They instructed me to try IMU re-calibration, Firmware update (continues to fail), Gimbal re-calibration (which I can't because the camera settings are unresponsive and the camera setting icon (camera with the horizontal line above it) is totally...

Hey fam, looking for some help. I have done the IMU, Compass, and Gimbal calibrations in different orders a multitude of times indoors and out and I still have massive gimbal horizon drift. It's off by 5+ deg to either side throughout flight. Horizon tilts when I have any yaw input, or it just...

So I just replaced my vibration plate (broken rubber band) and camera with gimbal (broken camera/strip). After installing both the new parts, I took it out to try it out. Immediately I noticed a few issues: The camera was at about a 35 to 45 degree angle, but after I recalibrated the gimbal it...

Can someone tell me if the circled part in the picture is supposed to be empty? It looks like a ribbon should go in but I cant a ribbon, I took it apart weeks ago and dont remember if there was something or not.

My Mavic Pro Platinum is making this strange screeching sound when it is tilted 90°. It doesn't happen on each tilt as you can see. Would be great if someone could confirm this. Thanks! *The beeping sound is from the controller, I had the gimbal up/down tilt set to the 5D button.

Hi, I have been reading a lot on this forum for a while now and there is some great content on here and this is my first post. I bought a mavic pro a few weeks ago, I bought it second hand. It flies great and it is great fun flying it. There seems to be something up with the camera on it...

Hello, as a noob, i powered on the Mavic Pro without removing the gimbal lock but i realized it soon enough, so during the startup sequence i quickly lifted the drone and removed it, the gimbal did its usual mumbo jumbo and aligned properly. I tried it afterwards and it seems fine, but i have...

I crashed my Mavic this evening (no excuses, entirely my own fault) and I’m getting an error message saying the Aircraft Motor is overloaded, and asking me to check if the gimbal clamp is removed. It is; in fact, I can’t get it back on without manhandling the camrei& gimbal assembly, which I’m...

Hey guys, new mavic pilot here. in real need of your help. i just bought my Mavic a few days ago, never even flew it once. just fired it up and updated firmware. today, i calibrated it’s IMU and everything was ok. then i moved on to calibrate it’s gimbal. i clucked gimbal auto calibration...

I have been flying the Mavic exactly a year now. Never had any major issues until just recently. The gimbal camera reset issue I have noticed a lot of people with the same issue and hope that there is a solution already or one not far away. My DJI Mavic Pro on almost every flight now has a...

Does anyone have experience using the "Mavic Gimbal Board Guard 3K Carbon Fiber Protective Plate Gimbal Protector" that can be found online in a number of places? http://amzn.to/2iYD9sp I'm specifically interested in the protective qualities for the gimbal. This product looks interesting...

el dia de ayer compre un mavic, lo actualice a la ultima firmware, al momento de probarlo en una casa el fpv se caía, lo volví a actualizar y esta vez funciono bien y en exterior re bien, gaste 2 cargas, lo deje enfriar y lo empaque, en la tarde lo saque para volar otro rato y el gimbal tenia...

Hi, I'm using Litchi without any problem for a long time and now I have a problem with Waypoints. During two Waypoint flights it has happened to me that the camera does not stop moving up and down. Crazy tilt. I have some Points of interest programmed but they do not work. At the time of the...

Please help! My MPs Gimbal does not respond to the Gimbal Dial. I have done the IMU and all the Gimbal calibrations but the gimbal keeps the camera frozen straight ahaed. I do have a second MP that runs without an issue on the same RC, so it cannot be the Gimbal Dial. Any idea?

So, I received my Mavic Wednesday night. So today was the only real flight I've had, it's dark when I get home. Anyway, I did take it up in my yard; not high but just to check it out. It drifted and fell, again not high but enough to out it in gimbal overload. Today I took it out for about 20...

I have been running Litchi on my Nexus 7 for most of the year with no problems. I have a waypoint mission that I have been running regularly and all has been perfect. Then I upgraded the tablet to Android 6.0.1. The last time I ran my mission the gimbal kept running up and down repeatedly. It...

I recently upgraded my Mavic to 1.04.0000 and have been testing the new and old flight modes. One difference (I think) I noticed was that the image was not staying level when pushing the right stick left or right. If I flew to the left (pushed the right stick left), the horizon would become...