We will need the .DAT file for this ... please follow the instruction given here to retrieve it -->
Post #4 then attach it here.
From the .TXT so far ...
You had quite alot of "notEnoughForce" notifications during larger parts of the flight ... according to Airdata.com the wind indication were as highest around 9-10m/s, but then with the Spark profile. It's been found that those can be like 30% to high ... so say winds of approx 7m/s in parts of the flight.
These were the messages:
0.0 0.0 IN FLIGHT0
0.0 0.2 4.1 0HOMEPOINT UPDATED. RTH ALTITUDE ADJUSTED TO 20 M!
7.1 62.9 :QUICKSHOT COMPLETE. AIRCRAFT RETURNING TO TASK START POINT!^
65.9 117.0 %CONTROL STICK MOVED. EXITED QUICKSHOT!{
120.0 355.5 AIRCRAFT MAX POWER LOAD REACHED. DECREASE ALTITUDE AND FLY WITH CAUTION. IF THIS ISSUE PERSISTS, LAND IMMEDIATELY (CODE: 30168)
355.5 (MAX POWER LOAD REACHED. FLY WITH CAUTION
357.6 357.6 IN FLIGHT0
493.5 AIRCRAFT MAX POWER LOAD REACHED. DECREASE ALTITUDE AND FLY WITH CAUTION. IF THIS ISSUE PERSISTS, LAND IMMEDIATELY (CODE: 30168)
493.5 (MAX POWER LOAD REACHED. FLY WITH CAUTION
499.6 499.6 IN FLIGHT0
678.9 AIRCRAFT MAX POWER LOAD REACHED. DECREASE ALTITUDE AND FLY WITH CAUTION. IF THIS ISSUE PERSISTS, LAND IMMEDIATELY (CODE: 30168)
678.9 (MAX POWER LOAD REACHED. FLY WITH CAUTION
718.1 718.1 IN FLIGHT0
732.3 .SD CARD MALFUNCTION. CHANGE CARD (CODE: 10023)
732.3 SD CARD MALFUNCTION
In below chart you have just left one of several periods of "notEnoughForce" (pink) ... lately we have seen that flights with a lot of this, kinds of "tiring" the engines making the flight system trying other strategies to increase the tilt inclination as probably one of the engines in the back is maxed out ... like take down the rpm for the front props, which leads to low vertical thrust & the AC goes down.
But we will see how the engine rpm's looked like once we have the .DAT.
View attachment 92300