error

Hi I recently had an issue where I was flying mi mavic mini above the sea and it suddenly went into auto landing mode, but I didn't even move the throttle down, here is my flight log can anyone explain this? https://www.phantomhelp.com/LogViewer/V3HQSXPBRFAGRM92CCYU/

So I've bought a second hand mavic air. Says to update on dji go 4 app but cant complete. Gyro is red so poor Cant calibrate shows errors please see attached errors. Any help would be appreciated Thanks Justyn

Hoping someone here can help me with an issue that has been plaguing my workplace. We have a few mavic pros that my work uses for shooting real estate, and they all work fine when bringing footage in to premiere except for one Pro. One clip from this drone on every shoot causes premiere to...

Getting an error when importing to Vegas Pro 13. Nothing wrong with the file it plays fine in VLC and imports into Final Cut Pro on my mac. "Warning: An error occurred while opening one or more files. The file is most likely corrupted or of an unknown format" After googling I found an article...

Hey fellas, I had a minor crash a few weeks ago and hadn’t noticed any real damage to my Mavic pro. The only thing I noticed is sometimes at a low altitude the drone starts to drop in altitude for instance, I had it at about 8 feet just observing and notice on my controller it went 7.8, 7.5...

The remote controller for my Mavic Pro has become erratic, likely after too much bouncing during off-road driving. It now takes ~5 minutes to shutdown every time. I'll shut it down normally and the LED screen will continue to say Shutdown for 5 mintues, during which time the controller doesn't...

On my last flight yesterday (the drone was maybe 20m above me when that happened) I had a short disconnect, which unfortunately is not displayed on the flight recordings in the DJI Go 4 app when the flight is being played back. But what I do see is a few warnings that I'm not sure about because...

My mavic was working fine until i tried to update the firmware using DJI Assistant 2 (current firmware: 01.03.0900 to 01.04.0100) but it fail during the transmission, now the drone doesn't connect to the RC nor the PC using DJI Assistant, i tried to bind the RC but doesn't recognize the drone...

I was recently flying my M2P in Tripod mode, VERY SLOWLY going backwards about 1 foot off ground/water/weeds. two of the props touched some raspberry shoots (thing and very strong) I then hear "landing". Since itr was about 1 foot over weeds, it all happened very quickly. I went over to the...

Problem? Gimble Wobbling a lot - before and after take flight Was unit in a crash? No What have you tried so far? See if there is any problem in the gimbal itself, the fitting, and it seems ok, and i calibrated the gimbal on app What device are you using? iPhone 6 What firmware are you...

Hi everyone, I had a minor crash with my mavic pro two weeks ago. I was getting the errors: 1.Gimbal motor overloaded. Check weather gimbal clamp is removed. 2. Gimbal is restarting. Check that gimbal rotates smoothly if restart fails again. Everything looked fine until I saw one of the LVDS...

Hi guys, i was flying at an attraction site where there was a small airport just about 30 kms away. Above me every 5 mins there would be a small plane that flys by. Plane is about id say 900-1000 meters above. I was flying at around 50meters high. My dji app went black screen and i was still...

Is anyone else experiencing a problem with the CASA App in Australia? I am consistently getting 'OK to fly here' results from areas that are obviously restricted ( example: icon placed directly over Gladstone airport on map, says OK to fly here). I contacted CASA and they said to reload the...

Hi everyone, I own Mavic Pro for a while and for the first time I experienced Downlink data connection lost message. The Mavic lost connection with the RC and returned to home for three times. I was flying in a very wide area in a green field, surrounded by a rock and hills, but I didn't flew...

Problem? Mavic Pro gimbal spazzes out upon startup Was unit in a crash? Yes, 1 month ago, but flew fine for a month What have you tried so far? calibration, factory reset, replaced gimbal with this part (Sign in or Register | eBay) What device are you using ( iphone , ipad, Samsung , etc)...

I have tried everything and spent 4+ hours on this, please help. The phone I was running wasn't on the official device list and was a little glitchy, so I bought a Nexus 7-2013, which is on the list. It is glitch/artifacts/or something bad. I have tried the last 3 firmware versions, multiple SD...

Hello, i got my Mavic pro almost half a year! But last flights i always get some errors. I'm running latest update, i did compass calibration, IMU calibration! Did not have any crash before! I'm flying in open area 200-500m from me with good signal, good satellite no metal interference and...

Hello! I have a problem with my Mavic Air. After flying it for a while battery went low so I decided to land it and download the pics to my phone. Meanwhile the battery died and after a while each rotor started to rotate individually for a bit, but fast enough to make the drone jump around. I...

Hello, My Mavic Pro is not working, The Mavic status light does not light up any colour on startup and i cannot connect5 my controller. I have Tried rebinding the controller but the drone does not seem to go into pairing mode or do anything. (Note the dose move the gimble and propellors on...

Hi all, Long time lurker first time poster. I am coming from a Phantom 2 and recently (beginning February) purchased a Mavic Pro Platinum. I am very happy so far and everything went well. However, during a small flight yesterday (2018.03.04) which was no longer than 7 minutes my AC seemed to...